SIP Link requirements

To complete these steps, you need the appropriate User management privilege. Without this privilege, you won't see all the controls needed to complete these steps.

Requires Standard or Premiere Voice editions

SIP Link lets you use Google Voice features, such as voicemail transcription, ring groups, and call forwarding, while maintaining your existing carrier and telephony routing solutions. This is done by connecting your existing carrier to Google through a set of certified Session Border Controllers (SBC).

SIP Link connects to your SBC over a TLS connection. Media sent over the SIP trunk is encrypted using DTLS or SDES. This connection takes place through the internet or direct peering.

Supported SBC vendors

We're currently testing more SBC vendors. Check back for updates. To be considered as an SBC vendor, please email SIP Link interop ([email protected]) with your SBC details.

SIP Link is currently available for the following SBC vendors. Use the integration notes to configure your devices. If you need additional help with the integration notes, contact your SBC vendor or carrier.

The minimum supported firmware versions are certified to work with SIP Link. Newer firmware versions that are a part of the same major firmware patch series are also certified.

While we support all carriers, here are some of the carriers that have tested SIP Link with their network. 

Carrier	Country
Bandwidth	Global
Colt	Europe
IPLAN	Argentina
Orange	France
Tata Communications	Global
Telefonica	Global
Telmex	LATAM

Note: The TCP or UDP may change. For more info, read Voice connectivity requirements.

Install a TLS certificate certified for SIP Link

SIP Link accepts TLS certificates from the following Certificate Authorities (CAs):

• DigiCert
• Entrust DataCard
• GlobalSign
• GoDaddy
• Sectigo

TLS certificate requirements

TLS certificates must contain the fully qualified domain name (FQDN) of the SBC as the common name (CN), be 2,048 bits in size, and use RSA or ECDSA encryption. The domain of the CN in the certificate must match the Workspace domain.

Note: Wildcard certificates are not supported.

The TLS certificate and the trust chain from any one of the public CAs must be added to the TLS profile of the SBC along with the Google Root certificate. 

To get the Google Root certificate:

1. Download Google’s trusted root CAs.
2. Extract GTS Root R1 (GTSR1).
3. If required, extract the GlobalSign Root CA certificate.
4. Upload the root certificates to your SBC keystore.
5. Enable mutual authentication for the SBC.
6. Once the certificate is installed, check for SIP Link ping options.

TLS connection requirements

Google Voice supports TLS version 1.2 or later. Voice requires clients to send the ClientHello with at least one supported cipher to succeed cipher negotiation. Your TLS connection must support the following cipher suite:

• TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
• TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
• TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
• TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384

Set up SIP Link trunk between SBC & Voice

1. Sign in to your Google Admin console.

   Sign in using your administrator account (does not end in @gmail.com).

2. In the Admin console, go to Menu  AppsGoogle WorkspaceGoogle Voice.
3. Click SIP TrunksAdd a SIP trunk.
4. Create a name for the SIP trunkclick Continue.
5. Click Add an SBC  and enter the following information:
   • For SBC name, enter the name of the SBC.
   • For Host name, enter the SBC host name that matches the CN on your TLS certificate. The domain must match the Workspace domain.
   • For Model, enter the model of your SBC. Some models might not function properly with Voice. For details, go to SBC supported vendors & models. 
   • For TLS certificate, upload the TLS certificate signed by the trusted CA that’s associated with the SBC (must be under 5 MB).
6. Click Save.
7. (Optional) To add more SBCs, repeat the steps above. For high availability (HA) pairs, you must specify the active host name.
8. Select the media encryption type for your SBCs. If you have multiple SBCs, they all must use the same encryption type. Voice accepts SDES and DTLS encryption.
9. Click Continue.
10. For Add a SIP header, copy the unique secret key and assign it
11. Assign the SIP header name, X-Google-Pbx-Trunk-Secret-Key.
12. Click Finish.

If you lose your secret key, you can find it on the SIP Trunk page by opening the SIP trunk and clicking Show secret key. When set up is complete make sure to read, Troubleshoot SIP Link setup.

Bandwidth Estimation for SIP Link

SIP Link over the Internet will need to account for the appropriate bandwidth capacity for the Internet connection.

SIP Link to User Call (Inbound Call) or User to SIP Link Call (Outbound Call)

Each SIP Link call to a user will take 84kbps(SIP Link side using g.711a/mu) + 50kbps (client side using Opus) = 134Kbps.
If we have 100 simultaneous calls then the bandwidth required is (134Kbps x 100) = 13400 Kbps or 13.4Mbps.

User to User Call (Intra Google Voice call)

Each User to User call will take 50kbps (client-A side using Opus) + 50kbps (client side using Opus) = 100Kbps.
Similarly, if we have 100 of such calls taking place, then 100 x 100Kbps = 10000Kbps or 10Mbps.
 

Note: The Internet connection will need to be monitored in real time to ensure sufficient capacity, or designed keeping in mind the number of calls of different types.

Related topics

• Troubleshoot SIP Link setup
• Manage SIP Link numbers