Adjust your Google Pixel Watch Band to ensure a more comfortable fit, attach the band securely and swap it to suit your personal style. For a comprehensive list of compatible Pixel Watch Bands and detailed information about them, refer to Google Pixel Watch accessory band tech specs.
Refer to our help article for additional tips on how to Clean and care for Google Pixel Watch.
Size up your wrist
Use millimeters for the most accurate measurements. If you're between sizes, choose the smaller size.
|
If you have a measuring tape |
Wrap it around your wrist for your measurement. |
  |
|
If you don’t have a measuring tape |
Find something like string, dental floss, or maybe even a USB cord. Take that, wrap it around your wrist, and then lay it out on a ruler to find your measurement. |
   |
| Stretch Band only: Use the Active Band that came with your device |
Clasp the Active Band where it feels comfortable. Check which hole is clasped, then find your stretch band size using the diagram to the right. |   |
Use millimetres for best accuracy. If you're between sizes, opt for the lower size.
|
If you have a tape measure |
Wrap it around your wrist for your measurement. |
|
|
If you don't have a tape measure |
Find something like string, dental floss or maybe even a USB cable. Take that, wrap it around your wrist and then lay it out on a ruler to find your measurement. |
|
| Stretch Band only: If you have a Pixel Watch Active Band |
Clasp the Active Band where it feels comfortable. Check which hole is clasped, then find your band size using the diagram below. |
|
Stretch Band
|
Size |
Best fit (mm) |
Wrist size (mm) |
Wrist size (in) |
|---|---|---|---|
|
Extra small |
130–149 |
130–150 |
5.11–5.90 |
|
Small |
150–159 |
140–160 |
5.51–6.29 |
|
Medium |
160–174 |
155–175 |
6.10–6.88 |
|
Large |
175–199 |
170–200 |
6.69–7.87 |
|
Extra large |
200–210 |
190–210 |
7.48–8.26 |
Attach a band to your Watch
- Turn your Google Pixel Watch over.
- Use the band to press the band release button and slide the band into place.
- Repeat on the other side.
- Turn your Google Pixel Watch over.
- Press the band release button, and then slide the band over the band release button while pulling away from the watch.
- Repeat on the other side.
Note: For Active Band (included with Google Pixel Watches1) and Active Sport Band. Instructions for putting on other bands will vary.
- Slide the band through the outer loop.
- Press the metal peg into a hole.
- Tuck in the band. If it's too long, try the small band.
During exercise, move the band higher on your wrist (two to three finger widths above your wrist bone) for a better fit. Our heart rate sensors work best with skin contact. Lower and loosen the band after exercise.
- Untuck the band.
- Bend the band back to release the peg.
Remove Metal Slim Band (Pixel Watch 2 and 3 – only 41 mm)
- Hold the buckle area on both sides of the band using your index finger and thumb.
- Pull away from your wrist to unclasp the buckle.
Metal Watch bands
- Metal Links Band
- Extra links (four standard, two long)
- Sizing tool
- Metal Slim Band
- Ten extra adjustable links
- Sizing tool
Recommended links for wrist size (Pixel Watch 2 and 3)
To determine the right fit for your band, use your wrist measurement to decide how many links to add or remove from the band. Based on your wrist size, below are recommendations for the number of links to add or remove from your band.
|
Wrist size (mm) |
Recommended link adjustment |
|---|---|
|
<130 |
Remove 6–8 links |
|
130–140 |
Remove 4–6 links |
|
141–150 |
Remove 1–3 links |
|
151–160 |
Add or remove 0–1 link |
|
161–170 |
Add 1–2 links |
|
171–180 |
Add 2–4 links |
|
181–190 |
Add 4–6 links |
|
191–200 |
Add 6–8 links |
|
>200 |
Add 8–10 links |
Add or remove links for metal bands
You can add or remove links (included with purchase) from your metal band to fit your wrist.
Note: The use of a Metal Mesh Band or Metal Slim Band watch accessory with the Pixel Watch is incompatible with the ECG app. All bands work for ECG readings on the Pixel Watch 2.
How to attach links to Metal Links Bands
Snap the extra links in so that the pins line up with the pin holes.
- With the sizing tool (included with band purchase), press the pins into the link's matching pin holes.
- Pull down to remove the extra links.
Important: Only links with imprinted holes can be removed.
How to attach links to Metal Slim Band
- Place the band on a flat surface and find the section with the link that the pins go into. Wedge the extra link(s) with pins into the section that is lying flat.
- Insert a pin into the link next to it, keeping the other pin exposed.
- Use the flat side of the sizing tool to push the other pin in.
- With the pin inserted, push the link into place.
How to remove links from Metal Slim Bands
- With the inside of the links facing upwards, use the pin side of the sizing tool to push the spring pin on the side.
- Gently twist the link off the band. Repeat this for the links that you'd like to remove.
- Reattach the clasp with the steps in Attach Metal Slim links.
-
Important: Only links with etched dashes can be removed.
Third-party accessory bands
Accessory bands from third-party companies may not fit properly.
These bands may contain materials that could impact those with skin sensitivities or other concerns. For best results, use only Google branded or Google authorised accessory bands.
1 Band options may vary by region and retailer. Accessory bands sold separately. 45 mm accessories are only compatible with the 45 mm Pixel Watch 3.