Safety, Warranty & Regulatory Guide for Google Pixel Watch and Google Pixel Watch USB-C® Magnetic Charging Cable

Where to find product information

This guide includes the basic safety guidelines in the printed Safety & Warranty booklet that comes with your Google Pixel Watch. It also includes additional safety, regulatory, and warranty information about Google Pixel Watch.

Safety and regulatory information: g.co/pixelwatch/regulatory OR Settings System Regulatory Information

Warranty details for your country of purchase, including instructions for making a claim: g.co/devicewarranty

Electronic regulatory labels (and specific absorption rate (SAR) values) for your device: Settings System Regulatory Information

Google Pixel Watch help: g.co/pixelwatch/help

Safety Warnings

WARNING: HEALTH AND SAFETY INFORMATION; READ BEFORE USE TO REDUCE THE RISK OF PERSONAL INJURY, DISCOMFORT, PROPERTY DAMAGE, INCLUDING DAMAGE TO YOUR GOOGLE PIXEL WATCH ACCESSORIES OR ANY CONNECTED DEVICES, AND OTHER POTENTIAL HAZARDS

Handling

Handle your Google Pixel Watch with care. You may damage the device or any included accessories if you disassemble, drop, bend, burn, crush or puncture your device. Do not use your Google Pixel Watch with a damaged enclosure,a cracked screen or some other form of physical damage. Using a damaged Google Pixel Watch may cause overheating or injury. If your Google Pixel Watch gets wet, do not attempt to dry it using an external heat source.

Your Google Pixel Watch is designed to work best in ambient temperatures between 32 °F and 95 °F (0 °C and 35 °C), and should be stored between ambient temperatures of -4 °F and 113 °F (-20 °C and 45 °C). Do not expose your Google Pixel Watch to temperatures above [113 °F (45 °C)], such as on a car dashboard or near a heating vent, as this may damage the product, overheat the battery, or pose a risk of fire. Keep your Google Pixel Watch away from heat sources and out of direct sunlight. If your device becomes too hot, disconnect it from its power source if it is plugged in, move it to a cooler place and do not use it until it has cooled.

Avoid dropping your Google Pixel Watch. If your Google Pixel Watch is dropped, especially on a hard surface and the user suspects damage, contact customer service: g.co/pixelwatch/contact

Repair & Service

Do not attempt to repair your Google Pixel Watch yourself. Disassembling the device may result in loss of water resistance or cause injury or damage to your device. The battery in this device is non-user replaceable.

Contact customer service if Google Pixel Watch isn’t working properly or has been damaged g.co/pixelwatch/contact.

Charging

Be sure the USB-C charging cable and the Google Pixel Watch are well ventilated when in use or charging. Using damaged cables, or charging when moisture is present, can cause fire, electric shock, injury, or damage to the Google Pixel Watch or other property. Do not charge your Google Pixel Watch when it’s wet. Avoid charging your device in direct sunlight.

When charging the device, make sure the power adapter (not provided) is plugged into a power outlet near the device and is easily accessible. Do not force this power adapter and other plugs or power adapters to a power outlet if space is not sufficient to accommodate both. When disconnecting the power adapter from a power outlet, pull on the adapter, never on the charging cable. Do not twist or pinch the cable, and do not force a connector into a port. If you receive a message while charging that instructs you to unplug the charging device or power adapter, disconnect the charging device or power adapter. Before attempting to charge again, make sure both the charging cable connector and the device's charging port are dry and clear of any objects.

Only charge your Google Pixel Watch with a compatible USB-C PD compliant charger or compatible charging accessories available on the Google Store or at Google authorized resellers (look for Google’s “made for” badge). The AC adapter must be certified with a Limited Power Source output per IEC 60950-1 and/or classified PS2 per IEC 62368-1, rated: 5 Volts DC, 1 Amp; and qualified per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. Failure to use compatible charging accessories can cause fire, electric shock, injury, or damage to the device and the accessories.

Wireless Charging

Your Google Pixel Watch may be charged with a Google approved wireless charger. Do not place other metallic or magnetic objects between the wireless charger and your Google Pixel Watch, as this could cause heating of the other object or cause your device not to charge properly. Examples of such objects include coins, jewelry, SIM tray tools and credit cards. If using a Google Pixel Watch case that is metallic or magnetic, remove the case prior to wireless charging as this may cause the device or charger to overheat or cause the device not to charge properly.

Prolonged Heat Exposure

The Google Pixel Watch and its charger generate heat during normal operation, and comply with applicable surface temperature standards and limits. Avoid prolonged skin contact when your device is charging because exposing skin to hot surfaces for a long period of time may cause discomfort or burns. Do not sleep on or with your device or cover them with a blanket or pillow while any of them are connected to a power source or charging. Be aware of this issue if you have a physical condition that affects your ability to detect heat against your skin.

Child Safety

This device is not a toy. Your Google Pixel Watch may contain (or may come with) small parts, and plastic, glass, or metal elements that may cause an injury or create a choking hazard. Children have strangled on cords and cables. Keep the USB-C charging cable out of the reach of children (more than 3 feet (0.9 meters) away) and do not allow them to play with the Google Pixel Watch and its accessories. They could hurt themselves or others, or could accidentally damage the product.

Hearing Loss

Prolonged exposure to loud sounds (including music) can cause hearing loss. To prevent possible hearing damage, avoid listening at high volume for prolonged periods of time. Continued exposure to high volumes and background noise can make loud sounds seem quieter than they actually are. Check the volume before using headphones or earphones.

Battery

This device contains a rechargeable - lithium-ion battery, which is a sensitive component that can cause injury if damaged. Do not attempt to remove the battery. Contact Google or a Google authorized service provider to replace the battery. For contact information, visit g.co/pixelwatch/contact. Replacement by non-qualified professionals can damage your device. Improper replacement or use of a non-qualified battery may present a risk of fire, explosion, leakage, or other hazard. Only IEEE-STD-1725 batteries with a charging system that has been qualified with the system shall be used. Do not modify or remanufacture/refurbish the battery, puncture or attempt to insert objects into the battery, immerse or expose the battery to water or other liquids, or expose the battery to fire, excessive heat, and/or other hazards.

Models: GBZ4S, GQF4C
GUANGDONG DESAY CORPORATION
23rd Floor, Desay Building, 12 Yunshan West Road, Huizhou City, Guangdong Province, China
[email protected]
Battery Model ID: GG4YU

Do not modify or remanufacture/refurbish the battery, puncture or attempt to insert objects into the battery, immerse or expose the battery to water or other liquids, or expose the battery to fire, excessive heat, and/or other hazards.

Disposal, Transportation, & Recycling

Dispose of and transport your device, batteries and accessories according to local environmental and transportation regulations. Do not improperly transport them or dispose of them in normal household waste. Improper disposal or transport may lead to fire, explosion, and/or other hazards. Do not open, crush, heat above 113 ̊°F (45 °C), or incinerate. For more information on recycling your device, batteries and accessories, visit g.co/HWRecyclingProgram.

Environmental Restrictions

To prevent damage to your Google Pixel Watch parts or internal circuits, do not use or store the device or its accessories in dusty, smoky, damp, or dirty environments, or near magnetic fields. Keep it away from heat sources and out of direct sunlight. Do not leave your Google Pixel Watch inside a vehicle or in places where the temperature may exceed 113 °F
(45 °C), such as on a car dashboard, window sill, near a heating vent, or behind glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the Google Pixel Watch, overheat the battery, or pose a risk of fire or explosion.

Explosive Atmospheres

Do not charge, use, store, or transport your Google Pixel Watch where flammables or explosives are stored (e.g., in gas stations, fuel depots, or chemical plants). Do not use your wireless device where blasting operations are in progress, or in potentially explosive atmospheres such as fuel or chemical transfer or storage areas, and in areas where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders). Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Observe all notices and signs where these hazards might exist.

Navigation

Google Pixel Watch can access mapping and navigation services. Maps and navigation depend on a working data connection and location services, and may not be available at all times or in all areas. Maps and directions may be inaccurate and actual conditions may differ from the map, data, traffic, directions, content and other results. Carefully review directions, follow all applicable traffic laws and signs, exercise your independent judgment and apply common sense, and use mapping and navigation services at your own risk. You are responsible at all times for your conduct and its consequences. Navigation with AR requires up to date Google Street View imagery and bright outdoor light, and isn’t available in India.

Distraction

Using your device when performing certain activities can distract you and may cause a dangerous situation for you or others. To reduce the risk of accidents (and because it’s prohibited by law in many places), do not use your device while driving, bicycling, or while operating machinery, and do not use it while engaging in any activities that have potentially serious consequences. Follow local laws about using mobile devices, headphones, and helmets.

Radio Frequency Exposure

Google Pixel Watch

This device has been evaluated and meets the applicable regulatory requirements for exposure to radio waves and is designed and manufactured not to exceed the applicable emission limits for exposure to radio frequency (RF) energy.

In the countries where the Specific Absorption Rate (SAR) limit is 1.6 W/kg averaged over one gram of tissue for use against the head/face and 4.0 W/kg averaged over ten grams of tissue for use against the limb , the highest SAR values for this device type are 0.4 W/kg against head/face with 10 mm (0.4 in) separation and 0.55 W/kg when used against the limb with no separation. In the countries where the Specific Absorption Rate (SAR) limit is 2.0 W/kg averaged over ten grams of tissue for use against the head/face, and 4.0 W/kg averaged over ten grams of tissue for use against the limb, the highest SAR values for this device type are 0.2 W/kg against face with 10 mm (0.4 in) separation and 0.4 W/kg when used against the limb with no separation.

You can find the SAR values applicable to each of those jurisdictions on your Google Pixel Watch: Settings System Regulatory Information.

To reduce exposure to RF energy, use a hands-free option, such as the built-in speakerphone, the supplied headphones, or other similar accessories. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

You can find additional information about SAR at the following pages:

• fcc.gov
• icnirp.org
• ec.europa.eu
• dot.gov.in

Google Pixel Watch USB-C Magnetic Charging Cable

This device has been evaluated and meets the applicable regulatory requirements for exposure to radio waves and is designed and manufactured not to exceed the permissible radio frequency (RF) exposure limits. To comply with applicable RF exposure compliance requirements, a distance of at least 20 cm should be maintained between the antenna of this device and persons during device operation.

Radio Frequency Interference

Observe rules that prohibit the use of wireless technology (e.g. cellular or Wi-Fi). Your device is designed to comply with regulations governing radio frequency emissions but use of wireless devices can negatively affect other electronic equipment. For example, while flying in an aircraft or immediately before boarding, use your wireless device only according to instructions provided by the airline. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. You may be able to use your device in airplane mode.

Emergency Communications

Wireless devices may not be reliable for emergency communications. This device operates using radio signals and may not establish or maintain a connection in all conditions. Your device is also powered by a rechargeable battery that may be affected by temperature, use, damage, and other conditions. While some jurisdictions transmit emergency information over wireless networks, your device may not always receive these communications depending upon network connectivity or other factors. Access to some features and emergency information or communications may not be available in all areas or languages.

Medical Device Interference

Your device uses radios and other components that emit electromagnetic fields, and also contains magnets. These electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and other implanted medical devices. Always keep the Google Pixel Watch and its charger at a safe distance away from the medical device. If you have questions about using your Google device with or near your medical device, consult your healthcare provider before using your Google Pixel Watch. If you suspect your Google Pixel Watch is interfering with your medical device, turn off your Google device and consult your physician for information specific to your medical device.

Hospitals

Switch off your wireless device when requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.

Health Related Functions

Your Google Pixel Watch is not a medical device and is intended for general health and wellness purposes only. It is not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease or other conditions.

LEDs

The LEDs visible on your device are safe under reasonably foreseeable conditions per the requirements in IEC 62471. However, it is recommended that you do not direct the LEDs at anyone’s eyes.

Skin Irritation

Some people may experience reactions to materials, such as nickel or latex, found in wearable items that are in extended contact with the skin. This can be due to allergies, the presence of skin irritants (like soap or sweat), or other causes. Keep your Google Pixel Watch clean and dry and do not wear it too tightly. Remove the Google Pixel Watch and consult a physician if you experience skin irritation. For more information, visit fitbit.com/product-care.

Medical Conditions

A small percentage of users may experience headaches, seizures, blackouts, eye strain, fatigue or dry eyes that are triggered by visual stimuli, such as flashing lights or bright patterns, or use of electronics with displays. Those symptoms can be experienced by people who have never previously experienced such issues. If you have a history of seizures, blackouts, epilepsy, a medical condition, or experience discomfort that you believe could be affected by your Google Pixel Watch, consult with a doctor before using your device. Stop using your Google Pixel Watch immediately and contact a doctor if you experience any symptoms that you believe could be caused or affected by your device (for example, headaches, blackouts, or seizures).

Musculoskeletal Disorders

Repetitive activities, such as typing, tapping, or swiping on the screen of your Google Pixel Watch, may cause discomfort in your fingers, hands, wrists, arms, shoulders, or other parts of your body. If you experience any discomfort from such activities, stop using your Google Pixel Watch and consult with your doctor.

Proper Handling and Usage

Follow these guidelines when using, storing or cleaning of your Google Pixel Watch:

Operating Temperature

Do not use or charge the Google Pixel Watch and the USB-C magnetic charging cable at ambient temperatures lower than 0 °C (32 °F) or higher than 35 °C (95 °F). If the interior temperature of the device exceeds normal operating temperatures, you may experience the following behaviors while the device tries to regulate its temperature: reduced performance and connectivity, inability to charge, or powering down of the display or device power down. You may not be able to use the device while it regulates its temperature. Move the device to a cooler (or warmer) location and wait a few minutes before attempting to use it again.

Care & Cleaning

Turn off your watch. Wipe your device with a damp cloth (no soap). Let air-dry or wipe with a non-abrasive cloth. For more cleaning tips, visit g.co/pixelwatch/care.

Unplug the Google Pixel Watch and charger before cleaning, during lightning storms, or when unused for extended periods of time. Do not clean your Google Pixel Watch while it is charging as this may cause injury or damage to your device. Avoid solvent and abrasive material that may cause damage to the product surface. Do not use any chemical detergent, powder, or other chemical agents (such as benzene) to clean the watch accessories.

Water Resistance

Your Google Pixel Watch is designed to comply with a water protection rating of 5 ATM under ISO Standard 22810:2010 when manufactured, but it is not waterproof. Water resistance is not a permanent condition, and decreases or is lost over time due to normal wear and tear, repair, disassembly, or damage. Dropping your device may result in a decrease or loss of water resistance. Google Pixel Watch is designed to be used in shallow water and should not be used for activities such as scuba diving, activities involving high velocity streams of water, such as water skiing, or activities that will expose your device to water at high temperature. Exposure to substances such as sunscreen, lotion, oil, perfume, alcohol, or other liquids may compromise water resistance or otherwise damage your device. Clean and dry your device after exposure to liquids.The charger and other accessories, including some Google Pixel Watch bands are not water resistant.

Magnetic Fields

Avoid placing any items containing magnets or which are sensitive to magnetism, such as credit cards, bank cards, audio/video tapes, or magnetic memory devices, near the Google Pixel Watch or its charging cable connector, because you may lose information stored on such items. Items containing information sensitive to magnets should be kept at least 2 inches (5 cm) away from this device.

Unauthorized repairs or modifications could result in permanent damage to the device, and may affect your warranty coverage and regulatory authorizations. Google Pixel Watch should only be repaired by Google or a Google authorized service provider. Contact customer service for authorized service. If you send your device in for service, you might receive a replacement device in place of your original device. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. If the goods are capable of retaining user-generated data then the repair or replacement may result in loss of the data. For online help and support, visit g.co/pixelwatch/help.

For customer service, call +61 1-800-992-940 (in Australia).

Regulatory Information

Regulatory information, certification, and compliance marks specific to Google Pixel Watch can be found on your device under Settings System Regulatory Information. Additional regulatory and environmental information can be found at g.co/pixelwatch/regulatory.

Regulatory information, certification, and compliance marks specific to Google Pixel Watch USB-C Magnetic Charging Cable can be found on the enclosure and USB connector of your device. Additional regulatory and environmental information can be found at g.co/pixelwatch/regulatory.

EMC Compliance Statement

Important: This device and its charging cable have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.

Regulatory Information: United States

FCC Regulatory Compliance

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. These devices may not cause harmful interference.
2. These devices must accept any interference received, including interference that may cause undesired operation.

Model number: GWT9R (LTE version) , GQF4C ( Wi-Fi version), G943M/G77PA (charging cable)
Product name: Google Pixel Watch

Responsible Party
Google LLC
1600 Amphitheatre Parkway
Mountain View, CA 94043
Contact: g.co/pixelwatch/contact

Battery Charger Efficiency

Regulatory Information: Canada

Industry Canada, Class B

This device complies with ICES-003 Class B limits. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This device complies with ISED license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Regulatory Information: UK

UK Compliance Notice

Hereby, Google LLC declares that radio equipment types: GQF4C, GBZ4S, G943M and G77PA are in compliance with Radio Equipment Regulation 2017. The full declaration of conformity may be found at g.co/pixelwatch/regulatory.

Wireless Information

United Kingdom

Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

Frequency	Power
Wi-Fi 2400-2483.5 MHz	< 20 dBm
Bluetooth: 2400-2483.5 MHz	< 20 dBm
UMTS Band I/VIII	< 25 dBm
LTE: 1,3,7, 8, 20, 28	< 25 dBm

NFC: 13.56 MHz and Wireless Power Transfer : 165-205 kHz are for receiving only.

For Google Pixel Watch USB-C Magnetic Charging Cable:

Frequency	Power
Wireless Power Transfer (165-205 kHz)	<-5 dBuA/m at 10m

Radio frequency interference

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

RoHS Compliance

This product is in compliance with Statutory Instrument 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substance in Electrical and Electronic Equipment Regulations.

UK REACH

UK REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, Statutory Instrument 2020 No. 1577) is the UK chemical substances regulatory framework. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at [email protected].

UK Waste Electric and Electronic Equipment Regulations

The WEEE symbol above means that according to local laws and regulations your product and its battery(ies) should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product, its electrical accessories, and its battery(ies) will help conserve natural resources, protect human health, and help the environment.

Manufacturer: Google LLC 1600 Amphitheatre Parkway Mountain View, CA, USA 94043

Google Commerce Limited UK Establishment, 1 St. Giles High Street, London, WC2H 8AG, United Kingdom

Regulatory Information: EU

EU Compliance Notice

Hereby, Google LLC declares that radio equipment types: GQF4C, GBZ4S, G943M and G77PA are in compliance with Directive 2014/53/EU (Radio Equipment Directive). The full declaration of conformity may be found at g.co/pixelwatch/regulatory.

Wireless Information

European Union

Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

Frequency	Power
Wi-Fi 2400-2483.5 MHz	< 20 dBm
Bluetooth: 2400-2483.5 MHz	< 20 dBm
UMTS Band I/VIII	< 25 dBm
LTE: 1,3,7, 8, 20, 28	< 25 dBm

NFC: 13.56 MHz and Wireless Power Transfer : 165-205 kHz are for receiving only.

For Google Pixel Watch USB-C Magnetic Charging Cable:

Frequency	Power
Wireless Power Transfer (165-205 kHz)	<-5 dBuA/m at 10m

Radio frequency interference

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

Specific Absorption Rate (SAR) Information

Google Pixel Watch complies with radio frequency specifications when used against face with 10mm separation, limited to 2 W/kg averaged over 10 grams of tissue, and limb with no separation, limited to 4 W/kg, averaged over 10 grams of tissue.

For Google Pixel Watch, the highest Specific Absorption Rate (SAR) values reported for this device type are Face: 0.2 W/kg, Limb: 0.4 W/kg.

PRECAUTIONS FOR USE OF THE DEVICE

The use of the device may be prohibited in certain situations (for example, while driving). For your safety, do not do anything that may cause distraction when driving. The use of the device may also be subject to restrictions in certain places (for example, in hospitals, planes, gas stations, schools ...).

Always keep the device and its charger at a safe distance away from the pacemaker or any other implanted medical device (insulin pumps, neurostimulators, etc.). To reduce the amount of exposure to radiation, it is recommended to:

• Use the device in good reception conditions, referring to the reception icon on your screen (avoid using it in an underground car park, when traveling by train or car, etc.);
• When in use, keep the device away from the belly for pregnant women, and away from the lower abdomen for teenagers;
• Provide reasonable use of the device by children and teenagers, for example by avoiding night calls and limiting the frequency and duration of calls.

These tips are given as a simple precautionary measure, as no danger from the use of the device has been found.

Waste Electrical and Electronic Equipment (WEEE) Directive and Battery Directive

The WEEE symbol above means that according to local laws and regulations your product and its battery(ies) should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product, its electrical accessories, and its battery(ies) will help conserve natural resources, protect human health, and help the environment.

Additional Regulatory Information: Germany

§ 10 I 2 ElektroG: Vor der Entsorgung dieses Geräts (i) Altbatterien/-akkus, sofern sie nicht vom Gerät umschlossen sind, und zerstörungsfrei entnehmbare Lampen zerstörungsfrei trennen und (ii) alle personenbezogenen Daten löschen. § 17 I und II ElektroG: Viele Vertreiber müssen Altgeräte kostenlos zurücknehmen.

Additional Regulatory Information: France

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.

REACH

REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC No 1907/2006) is the EU chemical substances regulatory framework. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at [email protected].

Manufacturer: Google LLC 1600 Amphitheatre Parkway Mountain View, CA, USA 94043

Google Commerce Limited, 70 Sir John Rogerson’s Quay, Dublin 2, D02 R296, Ireland

Regulatory Information: Australia

Regulatory Information: Japan

This is a Class B equipment. Although this equipment is intended for use in a residential environment, it could cause poor reception if used near a radio or a television receiver. Please follow instructions in the instruction manual.

VCCI-B

Regulatory Information: Taiwan

型號: GBZ4S, GQF4C, G943M, G77PA

本產品 (型號: G943M/G77PA) 僅適用搭配專屬專用之手錶使用，專屬專用手錶之廠牌：Google 型號：GQF4C, GBZ4S

台灣法規遵循

減少電磁波影響,請妥適使用 (型號:GBZ4S)
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前述合法通信，指依電信管理 法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Taiwan RoHS

Limited Warranty

The limited warranty is available in the Google Hardware Warranty Center.

Pixel, Google, G logo, Android, and other logos and marks are trademarks of Google LLC. USB-C® is a registered trademark of USB Implementers Forum. The Bluetooth® word mark is a registered trademark owned by the Bluetooth SIG, Inc. All other trademarks are the property of their respective owners.