Safety & regulatory manual (Pixel 3 & Pixel 3 XL 2018)

Where to find product information

Safety warnings

Regulatory information

United States

Canada

European Union

Singapore

Australia

India

Japan

Taiwan

Accessibility information

Where to find product information

This detailed guide includes the basic safety guidelines in the printed Safety & Warranty booklet that comes with your Pixel 3 and Pixel 3 XL. It also includes additional safety, regulatory, and warranty information about Pixel 3 and Pixel 3 XL.

  • Safety, environmental, and regulatory information: g.co/PixelSafetyInfo 
  • Warranty details for your country of purchase, including instructions for making a claim: g.co/PixelPhoneWarranty
  • Electronic regulatory labels and specific absorption rate (SAR) values for your device under setting: Settings And then About phone And then Regulatory labels.
  • Comprehensive online help:  g.co/pixelcare

Safety warnings

Caution WARNING: HEALTH AND SAFETY INFORMATION; READ BEFORE USE TO REDUCE THE RISK OF PERSONAL INJURY, DISCOMFORT, PROPERTY DAMAGE, INCLUDING DAMAGE TO YOUR PHONE AND OTHER POTENTIAL HAZARDS

To avoid damaging your phone, accessories, or any connected devices, and to reduce the risk of personal injury, discomfort, property damage, or other potential hazards, follow these precautions below.

Handling

Handle your phone with care. You may damage the device or the battery if you disassemble, drop, bend, burn, crush, or puncture your device. Do not use a device with a cracked screen or back cover. Using a damaged device may cause battery overheating or injury. Don’t expose your phone to liquids, which can cause a short circuit and overheating.  If your phone gets wet, do not attempt to dry it using an external heat source. 

The phone is designed to work best in ambient temperatures between 32° and 95° F (0° and 35° C), and should be stored between ambient temperatures of -4° and 113° F (-20° and 45° C). Do not leave your phone in places where the temperature may exceed  113° F (45° C), such as on a car dashboard or near a heating vent, as this may damage the product, overheat the battery, or pose a risk of fire.  Keep your phone away from heat sources and out of direct sunlight. If your device becomes too hot, disconnect it from its power source if it’s plugged in, move it to a cooler place, and don’t use it until has cooled.

Use of your phone in certain modes, such as gaming, taking videos, using a flashlight setting, or VR, can cause your phone to generate more heat than it would under normal operating conditions. This may cause your phone to operate in a reduced-power mode or temporarily shut down. Use extra care when operating the device in these modes.

Contact customer service and do not use the phone if it isn’t working properly or has been damaged. g.co/pixelcare

Charging

Be sure the power adapter and Pixel 3 and Pixel 3 XL are well ventilated when in use or charging. Using damaged cables or power adapters, or charging when moisture is present, can cause fire, electric shock, injury, or damage to the phone or other property.  When charging the phone, make sure the power adapter is plugged into a socket near the phone and is easily accessible. Avoid charging the device in direct sunlight. This product is intended for use with a certified Limited Power Source (LPS) per IEC 60950-1 rated: 5 Volts DC, maximum 3 Amp; 9 Volts DC, maximum 2 Amp; or both.  This device must be used with an AC adapter that has been qualified per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. This device comes with an AC adapter that has the proper certification.

Only charge your phone with the included power adapter and cable, or compatible charging accessories available on the Google Store. Failure to use compatible charging accessories can cause fire, electric shock, injury, or damage to the phone and the accessories.

When disconnecting the power adapter from a power outlet, pull on the adapter, never on the cable.  Do not twist or pinch the USB cable, and do not force a connector into a port.

Your phone may be charged with a Qi-compliant or Google approved wireless charger.  Do not place metallic or magnetic foreign objects between the wireless charger and the phone, as this could cause heating of the foreign object or cause the device not to charge properly.  Examples of these objects include coins, jewelry, and credit cards.  If using a phone case that is metallic or magnetic, remove the case prior to wireless charging as this may cause the device or charger to overheat or cause the device not to charge properly.

Prolonged Heat Exposure

The phone and its charger generate heat during normal operation and comply with applicable surface temperature standards and limits. Avoid prolonged, direct, or indirect skin contact when the device is in use or charging because exposing skin to hot surfaces for a long period of time may cause discomfort or burns. Do not sleep on your device or its power adapter, or cover them with a blanket or pillow. Be aware of this issue if you have a physical condition that affects your ability to detect heat against your skin.  

Hearing Protection

Prolonged exposure to loud sounds (including music) can cause hearing loss. To prevent possible hearing damage, avoid listening at high volume for prolonged periods of time. Continued exposure to high volumes and background noise can make loud sounds seem quieter than they actually are. Check the volume before using headphones or earphones.

Hearing protection

Battery

This phone contains a rechargeable Lithium-ion battery which is a sensitive component that can cause injury if damaged. Do not attempt to remove the battery. Contact Google or a Google authorized service provider to replace the battery. Replacement by non-qualified professionals can damage your phone. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard. If the battery leaks, do not allow the leaking fluid to come into contact with eyes, skin, or clothing. If the fluid is already in contact with the eyes, do not rub them. Rinse the eyes with clean water immediately and seek medical advice. Dispose of your phone, battery, and accessories according to local environmental regulations. Do not dispose of them in normal household waste. Improper disposal may lead to fire, explosion, and/or other hazards. Do not open, crush, heat above 45 ̊C (113 ̊F), or incinerate. For more information on recycling your phone, visit g.co/PixelRecyclingInfo

Environmental Restrictions

To prevent damage to your phone’s parts or internal circuits, do not use or store the device or its accessories in dusty, smoky, damp, or dirty environments, or near magnetic fields.  Keep it away from heat sources and out of direct sunlight. Do not leave your phone inside a vehicle or in places where the temperature may exceed 113° F (45° C), such as on a car dashboard, window sill, near a heating vent, or behind glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time.  This may damage the product, overheat the battery, or pose a
risk of fire or explosion.

Explosive Atmospheres

Do not use, store, or transport your phone where flammables or explosives are stored (in gas stations, fuel depots or chemical plants, for example). Do not use your phone where blasting operations are in progress or in potentially explosive atmospheres such as fueling areas, fuel storehouses, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Observe all notices and signs where these hazards might be present.

Navigation  

Your device may include mapping and navigation services.  These services depend on a working data connection and location services that may not be available at all times.  Maps and directions may be inaccurate.  Carefully review directions, use common sense, and follow all applicable traffic laws and signs.

Actual Conditions; Assumption of Risk. 

When you use Google Maps/Google Earth's map data, traffic, directions, and other content, you may find that actual conditions differ from the map results and content. Exercise your independent judgment and use Google Maps/Google Earth at your own risk. You’re responsible at all times for your conduct and its consequences.

Distraction

Using your device when performing certain activities can distract you and may cause a dangerous situation for you or others. To reduce the risk of accidents (and because it’s prohibited by law in many countries), do not use your device while driving, bicycling, while operating machinery, or engaging in any activities that have potentially serious consequences. Follow local laws about using mobile devices, headphones, and helmets. 

Radio Frequency Interference

Observe rules that prohibit the use of wireless technology (e.g. cellular or Wi-Fi).  Your device is designed to comply with regulations governing radio frequency emissions but use of wireless devices can negatively affect other electronic equipment.  For example, while flying in an aircraft or immediately before boarding, use your wireless device only according to instructions provided by the airline. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. You may be able to use your device in airplane mode.

Medical Device Interference

Your device uses radios and other components that emit electromagnetic fields, and contains magnets. These electromagnetic fields and magnets may interfere with pacemakers and other implanted and nearby medical devices. Always keep the phone and its charger more than 15 cm (6 in) from the surface of the skin near the pacemaker. Hold the phone on the other side of your body from the pacemaker or other implanted or nearby medical device.  Do not carry the phone in a breast pocket or in a pocket near the pacemaker or other implanted or nearby medical devices.  If you have questions about using your Google device with or near your pacemaker or other implanted or nearby medical devices, consult your healthcare provider. If you suspect your device is interfering with your pacemaker or medical devices, turn off your device and consult your physician for information specific to your medical device.

Hospitals

Switch off your wireless device when requested to do so in hospitals, clinics, or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.

Child Safety

Your phone contains (or comes with) small parts, plastic elements, and parts with sharp edges that may cause an injury or create a choking hazard.  The charging cable may be a strangulation hazard for small children.  Do not leave your phone and its accessories within the reach of small children or allow them to play with it. They could hurt themselves or others, or could accidentally damage the phone.  Consult a physician immediately if small parts are swallowed.

Emergency Communications

This device operates using radio signals and may not establish or maintain a connection in all conditions. Wireless devices may not be reliable for emergency communications. While some jurisdictions transmit emergency information over wireless networks, your device may not always receive these communications depending upon network connectivity.

Health Related Functions

Your phone and its associated exercise application functions are not medical devices and are intended for information purposes only. They are not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, monitoring, mitigation, treatment, or prevention of disease.

Proper Handling and Usage

Follow these guidelines when using, storing, cleaning, or disposing of your phone:

Operating Temperature

Do not use or charge your phone at ambient temperatures lower than 0°C (32°F) or higher than 35°C (95°F). If the interior temperature of the device exceeds normal operating temperatures, you may experience the following behaviors while the device tries to regulate its temperature: reduced performance and connectivity, inability to charge, or powering down of the display or the phone. You may not be able to use the phone while it regulates its temperature. Move the phone to a cooler (or warmer) location and wait a few minutes before attempting to use it again.  

Care & Cleaning

Unplug the device and adapter before cleaning, during lightning storms, or when unused for extended periods of time. Avoid solvent and abrasive material that may cause damage to the product surface.  Exposure to makeup, chemicals, and dyed materials such as denim can stain the light colored phone case.  Use a clean, soft, and dry or slightly damp cloth to clean the device and accessories.  Do not use any chemical detergent, powder, or other chemical agents (such as alcohol or benzene) to clean the phone or accessories. Don’t clean your device while it is charging.

Water Resistance 

Your phone is water resistant but not waterproof. Your Pixel 3 or Pixel 3 XL phone has a water resistance rating of IPX8 under IEC standard 60529. Water resistance may be compromised due to normal wear and tear or damage to the phone. The phone charger and other accessories are not water resistant. Do not charge the device when wet.

Magnetic Fields

Avoid placing any media containing magnets or sensitive to magnetism, such as credit cards, bank cards, audio/video tapes, or magnetic memory devices, near this product or its charger or charging cable, because you may lose information stored on those media. Media containing information sensitive to magnets should be kept at least 5 cm (2 in) away from this phone.

Human Exposure to Radio Frequency Energy

Like any other phone, your wireless device emits radio frequency (RF) energy during use. According to the International Commission on Non-Ionizing Radiation Protection (ICNIRP), the critical effect of RF exposure relevant to human health and safety is heating of exposed tissue. 

According to the Federal Communications Commission (FCC), “Some health and safety interest groups have interpreted certain reports to suggest that wireless device use may be linked to cancer and other illnesses, posing potentially greater risks for children than adults. While these assertions have gained increased public attention, currently no scientific evidence establishes a causal link between wireless device use and cancer or other illnesses.”

However, above a certain level (referred to as the threshold) depending on the duration of exposure, RF exposure and the accompanying temperature rise can provoke serious health effects, such as heatstroke and tissue damage (burns). To avoid hazards to health deriving from high RF exposure, limits are set in relation to the threshold known to show adverse effects, with an additional reduction factor to take care of scientific uncertainties. These limits are generally expressed in terms of the specific absorption rate (SAR). SAR is a measure of the rate of absorption of RF energy in the body. Tests for SAR are conducted with the phone transmitting at its highest power level in all tested frequency bands. SAR-limits were first established in 1996 by the FCC in the USA and they were then adopted elsewhere.

You can find additional information about SAR at the following pages:

  • fcc.gov
  • icnirp.org
  • ec.europa.eu


Pixel 3 and Pixel 3 XL were tested and certified to not exceed SAR limits in the U.S., Canada, the European Union, Japan, Australia, Singapore, India, and Taiwan.  You can find the SAR values applicable in each of those jurisdictions on your phone under setting: Settings And then About phone And then Regulatory labels.

Service & support

For online help and support, visit g.co/PixelCare. If you send your phone for service, you might receive a replacement phone (in place of your original phone).

Regulatory information

Regulatory information, certification, and compliance marks specific to Pixel 3/Pixel 3 XL can be found on your device under Settings And then About phone And then Regulatory labels and on the back of your device.

EMC compliance statement

Important: This device, power adapter, and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.

Regulatory information: United States

FCC Regulatory Compliance

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Radio Frequency Exposure 

This device meets the U.S. Federal Communications Commission's (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radio frequency (RF) energy. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device, including its antenna, and the user's body.  

Specific Absorption Rate (SAR) Information  

This device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).

The Specific Absorption Rate (SAR) limit adopted by the U.S. is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit.  Pixel 3 and Pixel 3 XL comply with radio frequency specifications when used near your ear or at a distance of 1.0 cm (0.4 in) from your body.  Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

Pixel 3 maximum SAR values as reported to the FCC are:

  • 1.34 W/kg when holding it to your ear
  • 1.34 W/kg when properly worn on the body

Pixel 3 XL maximum SAR values as reported to the FCC are:

  • 1.35 W/kg when holding it to your ear
  • 1.35 W/kg when properly worn on the body

Hearing Aid Compatibility (HAC)    

Pixel 3 and Pixel 3 XL have been evaluated and certified to be compatible with hearing aids per technical specification ANSI C63.19-2011. There are two measures of hearing aid compatibility:
M rating, which is a measure of immunity to radio frequency interference for acoustic coupling hearing aids; and T rating, which is a measure of performance when used with an inductive coupling (telecoil) hearing aid.

Hearing aid compatible devices offered by Google are rated:

  • Pixel 3              M3/T3
  • Pixel 3 XL        M3/T3

Per FCC rules, a mobile phone is considered hearing aid compatible if rated M3 or M4 for acoustic coupling or T3 or T4 for inductive coupling.

Pixel 3 and Pixel 3 XL have been tested and rated for use with hearing aids for some of the wireless technologies that they use. It is important to try the different features of your phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or Google for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.

Google’s devices meet the hearing aid compatibility (HAC) requirements set by the Federal Communications Commission (FCC).

Recycling

For recycling in the U.S., visit g.co/HWRecyclingProgram

Regulatory information: Canada

Innovation, Science, and Economic Development (ISED) Canada, Class B

This Class B digital apparatus complies with Canadian ICES-003.CAN ICES-3(B)/NMB-3(B).

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Notice: The ISED Canada regulations provide that changes or modifications not expressly approved by Google could void your authority to operate this equipment.

Innovation, Science, and Economic Development (ISED) Canada Notices

Pixel 3 and Pixel 3 XL comply with Innovation, Science and Economic Development Canada (ISED or IC) license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) these devices may not cause interference; and (2) these devices must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio 
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 
(1) l'appareil ne doit pas produire de brouillage, et 
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux
 

Specific Absorption Rate (SAR) Information     

The radiated output power of Pixel 3 and Pixel 3 XL is below the Industry Canada (IC) radio frequency exposure limits. These devices have been evaluated for and shown compliant with the IC Radio Frequency (RF) Exposure limits. These devices should be used in a manner such that the potential for human contact during normal operation is minimized.

When using the device next to your body (other than in your hand or against your head), maintain a distance of 10 mm from your body for Pixel 3 and Pixel 3 XL, to be consistent with how each device is tested for compliance with RF exposure requirements. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components.

Pixel 3 maximum SAR values as reported to the IC are:

  • 1.34 W/kg when holding it to your ear
  • 1.34 W/kg when properly worn on the body


Pixel 3 XL maximum SAR values as reported to the IC are:

  • 1.35 W/kg when holding it to your ear
  • 1.35 W/kg when properly worn on the body

Regulatory information: EU

EU Compliance Notice

Hereby, Google LLC declares that Pixel 3 and Pixel 3 XL are in compliance with Directive 2014/53/EU (Radio Equipment Directive). The full declaration of conformity is below:

Declaration of Conformity (Pixel 3)

Declaration of Conformity

 

EU Declaration of Conformity

 

Google LLC
1600 Amphitheatre Parkway
Mountain View, CA 94043

This declaration of conformity is issued for:

Radio Equipement model number:                                    G013A
Product name:                                                                      Pixel 3
Software version                                                                  Android OS
Accessories supplied:                                                         USB-C earbud, AC adapter, USB-C to C cable, USB-C to 3.5mm                                                                                                        adapter, Quick Switch Adapter
 

We, Google LLC, declare under our sole responsibility that the above named product(s) conform to the essential requirements of the following European Union directives:

Radio Equipment Directive (RED)                                      2014/53/EU
RoHS Recast Directive                                                        2011/65/EU
Ecodesign Requirements for Energy                                2009/125/EC
Related Products Directive                                

The conformity assessment procedure referred to in Article 10 and detailed in Annex III of the Radio Equipment Directive 2014/53/EU has been carried out by Notified Body Name: Cetecom, Number: 0680 (Type Examination Certificate #: M18-0547-01-TEC). The following harmonized standards and normative documents are those to which the product’s conformance is declared, and by specific reference to the essential requirements of the referenced Directives:

Health & Safety (Article 3.1(a) of the RED)

IEC 60950-1:2005 + A1:2009 + A2:2013
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
IEC 62368-1:2014, EN 62368-1:2014 + A11:2017
EN 62311:2008, EN 62479:2010
EN 50360:2017, EN 62209-1:2016
EN 50566:2017, EN 62209-2:2010

EMC (Article 3.1(b) of the RED)  

Draft EN 301 489-1 v2.2.0
Final Draft EN 301 489-3 V2.1.1
Draft EN 301 489-17 V3.2.0
Draft EN 301 489-19 V2.1.0
Draft EN 301 489-52 V1.1.0
EN 55032:2015/AC:2016 Class B
EN 55035:2017

Spectrum (Article 3.2 of the RED) EN 300 328 v2.1.1
EN 301 893 v2.1.1 EN 301 511 V12.5.1
EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.2, 
EN 301 908-13 V11.1.2
EN 300 328 V2.1.1, EN 301 893 V2.1.1
EN 303 413 V1.1.1, EN 300 330 V2.1.1
Draft EN 300 440 V2.2.0
EN 303 417 V1.1.1
Equipment within Certain Categories or Classes (Article 3.3 of the RED) N/A
Ecodesign Requirements for Energy Related Products Directive, 2009/125/EC Regulation 1275/2008, Regulation 278/2009
RoHS Recast Directive, 2011/65/EU EN 50581:2012

 

Signed for and on the behalf of Google LLC

Pixel 3 DoC signature

Signature                                          Date of issue: July 25, 2018 in Mountain View, CA, USA

Jason Bremner 
Vice President, Product Management

Revision: 01                                                       

 

Declaration of Conformity (Pixel 3 XL)

EU Declaration of Conformity

 

Google LLC
1600 Amphitheatre Parkway
Mountain View, CA 94043

This declaration of conformity is issued for:

Radio Equipement model number:                                    G013C
Product name:                                                                      Pixel 3 XL
Software version                                                                  Android OS
Accessories supplied:                                                         USB-C earbud, AC adapter, USB-C to C cable, USB-C to 3.5mm                                                                                                        adapter, Quick Switch Adapter
 

We, Google LLC, declare under our sole responsibility that the above named product(s) conform to the essential requirements of the following European Union directives:

Radio Equipment Directive (RED)                                      2014/53/EU
RoHS Recast Directive                                                        2011/65/EU
Ecodesign Requirements for Energy                                2009/125/EC
Related Products Directive                                

The conformity assessment procedure referred to in Article 10 and detailed in Annex III of the Radio Equipment Directive 2014/53/EU has been carried out by Notified Body Name: Cetecom, Number: 0680, and has assessed compliance with Article 3.2 of the RE-D and issues the EU Type Examination Certificate M18-0553-01-TEC.

The following harmonized standards and normative documents are those to which the product’s conformance is declared, and by specific reference to the essential requirements of the referenced Directives:

Health & Safety (Article 3.1(a) of the RED)

IEC 60950-1:2005 + A1:2009 + A2:2013
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
IEC 62368-1:2014, EN 62368-1:2014 + A11:2017
EN 62311:2008, EN 62479:2010
EN 50360:2017, EN 62209-1:2016
EN 50566:2017, EN 62209-2:2010

EMC (Article 3.1(b) of the RED)  

Draft EN 301 489-1 v2.2.0
Final Draft EN 301 489-3 V2.1.1
Draft EN 301 489-17 V3.2.0
Draft EN 301 489-19 V2.1.0
Draft EN 301 489-52 V1.1.0
EN 55032:2015/AC:2016 Class B
EN 55035:2017

Spectrum (Article 3.2 of the RED) EN 300 328 v2.1.1
EN 301 893 v2.1.1 EN 301 511 V12.5.1
EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.2, 
EN 301 908-13 V11.1.2
EN 300 328 V2.1.1, EN 301 893 V2.1.1
EN 303 413 V1.1.1, EN 300 330 V2.1.1
Draft EN 300 440 V2.2.0
EN 303 417 V1.1.1
Equipment within Certain Categories or Classes (Article 3.3 of the RED) N/A
Ecodesign Requirements for Energy Related Products Directive, 2009/125/EC Regulation 1275/2008, Regulation 278/2009
RoHS Recast Directive, 2011/65/EU EN 50581:2012

 

Signed for and on the behalf of Google LLC

Pixel 3 DoC signature

Signature                                          Date of issue: July 25, 2018 in Mountain View, CA, USA

Jason Bremner 
Vice President, Product Management

Revision: 01                                                       

 

Restrictions and Requirements under Directive 2014/53/EU

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK, CH, IS, LI, NO, and TR. 

European Conformity

Frequency Bands and Power

European Union, United Kingdom
Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

 

Frequency

Power

WiFi 2 400-2 483,5 MHz

Max 20 dBm

WiFi 5 150-5 250 MHz

Max 23 dBm

WiFi 5 250-5 350 MHz

Max 23 dBm

WiFi 5 470-5 725 MHz

Max 23 dBm

WiFi 5 745-5 825 MHz Max 14 dBm

Bluetooth: 2 400-2 483,5 MHz

Max 20 dBm

NFC 13.56 MHz

Max. -10 dBuA/m

GSM 900

PC4 (Max 33.5 dBm)

GSM 1800

PC1 (Max 30.5 dBm)

UMTS Band I/VIII

PC3 (Max 24.5 dBm)

LTE:1, 3, 7, 8, 20, 28, 38, 40, 42

PC3 (Max 24.5 dBm)


Restrictions in the 5 GHz Band

WLAN function of these devices is restricted only to indoor use when operating in the 5150 to 5350 MHz frequency range to reduce the potential for harmful interference to co-channel mobile satellite systems.

Radio frequency interference

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

Specific Absorption Rate (SAR) information - EU

These devices are classified for use in a typical Class B domestic environment.

Pixel 3 and Pixel 3 XL comply with radio frequency specifications when used near your ear or at a distance of 0.5 cm from your body.  Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. 

For Pixel 3, the highest Specific Absorption Rate (SAR) value reported for this device type when tested at the ear is 1.33 W/kg, and when properly worn on the body is 1.49 W/kg. 

For Pixel 3 XL, the highest Specific Absorption Rate (SAR) value reported for this device type when tested at the ear is 1.39 W/kg, and when properly worn on the body is 1.40 W/kg.

Waste Electrical and Electronic Equipment (WEEE) & Batteries Directive

Don't put batteries in trash

The Waste Electrical and Electronic Equipment (WEEE) Directive requires that all Electrical and Electronic Equipment (EEE), including your phone and its accessories, must be marked with the symbol of the crossed-out wheeled bin. This symbol means that the equipment must not be disposed of as unsorted municipal waste. Disposing of WEEE together with normal waste may pose a risk to the environment and to human health, due to certain substances used in EEE and their batteries.

Under the WEEE Directive, each EU Member State is responsible for achieving a high level of collection of WEEE for treatment, recovery, and environmentally sound disposal. Before tossing your device, think a minute about how to reduce the amount of WEEE you create. You could, for example, reuse it, recover it, or turn it into artwork. By simply extending the life of your device, you will have reduced waste and helped the EU achieve its objectives.

The success of this EU policy will depend on your active contribution in returning your WEEE to the appropriate facilities dedicated to the disposal of such waste. You should contact your local authority or your retailer for details about the return and collection points available.

Additional Regulatory Information: Italy

Informazioni Sullo Smistamento Degli Imballaggi - Italia

Pixel 2,3,4,5 Articolo ricondizionato

RACCOLTA DIFFERENZIATA

Scatola

Carta

PAP 20

Vaschetta

Carta

PAP 22

Pellicola per schermo

Plastica

PET 1

Verifica le disposizioni del tuo Comune sullo smaltimento dei rifiuti.

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.

REACH

REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC No 1907/2006) is the EU regulation addressing the safe production and use of chemicals. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs).  For information, you can contact Google at [email protected].

The point of contact for regulatory matters in the EU is Google Commerce Limited, 70 Sir John Rogerson's Quay, Dublin 2, Ireland.

Manufacturer info

Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA, 94043

Importer info

Importer in the European Union: Google Commerce Limited, 70 Sir John Rogerson’s Quay, Dublin 2, D02 R296, Ireland

Importer in the United Kingdom: Google Commerce Limited UK Establishment, 1 St. Giles High Street, London, WC2H 8AG, United Kingdom

Regulatory information: Singapore

Embedded SIM (eUICC) Information for Singapore

The embedded SIM (eSIM) feature is not supported in Singapore. 

Specific Absorption Rate (SAR) information

Pixel 3 and Pixel 3 XL have been evaluated for and shown compliant with the IMDA Radio Frequency (RF) Exposure limits. These devices should be used in a manner such that the potential for human contact during normal operation is minimized. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components.

When using the device next to your body (other than in your hand or against your head), maintain a distance of 5 mm from your body, to be consistent with how each device is tested for compliance with RF exposure requirements.

Pixel 3 maximum SAR values as reported to IMDA are

  • 1.33 W/kg when holding it to your ear
  • 1.49 W/kg when properly worn on the body

Pixel 3 XL maximum SAR values as reported to IMDA are

  • 1.39 W/kg when holding it to your ear
  • 1.40  W/kg when properly worn on the body

Regulatory information: Australia

Specific Absorption Rate (SAR) information

Pixel 3 and Pixel 3 XL comply with radio frequency specifications when used near your ear or at a distance of 0.5 cm from your body.  Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. 

For Pixel 3 , the highest Specific Absorption Rate (SAR) value reported for this device type when tested at the ear is 1.33 W/kg, and when properly worn on the body is 1.49  W/kg. 

For Pixel 3 XL , the highest Specific Absorption Rate (SAR) value reported for this device type when tested at the ear is 1.39 W/kg, and when properly worn on the body is 1.40 W/kg.

WLAN function of these devices is restricted only to indoor use when operating in the 5150 to 5350 MHz frequency range to reduce the potential for harmful interference to co-channel mobile satellite systems.

Regulatory information: India

Specific Absorption Rate (SAR) information

Your phone is a radio transmitter and receiver. It complies with the international guidelines in relation to the limiting of human exposure to electromagnetic fields, and has been specifically designed to meet the guidelines for exposure to radio waves established by the Department of Telecommunications, Ministry of Communications and Information Technology, Government of India ("DoT"). The guidelines use a unit of measurement known as Specific Absorption Rate ("SAR") which is a unit of body-absorbed radio frequency quantity when the phone is in use. The SAR limit in India for mobile devices is 1.6 W/kg over a mass of 1 gram of human tissue.

Pixel 3 and Pixel 3 XL comply with these guidelines when used near your ear or at a distance of 1.0 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. 

For Pixel 3 , the highest Specific Absorption Rate (SAR) value reported for this device type when tested at the ear is 1.24 W/kg, and when properly worn on the body is 1.33 W/kg. 
For Pixel 3 XL , the highest Specific Absorption Rate (SAR) value reported for this device type when tested at the ear is 1.31 W/kg, and when properly worn on the body is 0.99 W/kg.

You can also see SAR values on the website of the DoT/Telecommunication Engineering Centre. 

While most of the laboratory studies have been unable to find a direct link between exposure to
radio frequency radiation and health, the DoT has prescribed the following precautionary measures while using the mobile handset:

  • Use a wireless hands-free system (headphone, headset) with a lower power Bluetooth emitter.
  • Make sure that the mobile phone has a low SAR.
  • Keep your calls short or send a text message (SMS) instead. This advice applies especially to children, adolescents and pregnant women.
  • Use mobile phone when the signal quality is good.
  • People having active medical implants should preferably keep the mobile phone at least 15 cm away from the implant.
     

Recycling, e-waste management and handling statement

Don't put batteries in trash

In India, this label indicates that this product should not be thrown away with household waste. It should be deposited at an appropriate facility to allow recovery and recycling.

Google declares that your phone has been designed and manufactured in compliance with E-Waste (Management) Rules, 2016 (hereafter ""the Rules""), and is specifically in compliance with Rule 16 (1) on the reduction in the use of hazardous substances in the manufacture of electrical and electronic equipment and their maximum allowed concentrations by weight in the homogenous materials (except for the exemptions listed in schedule II).

Improper handling, disposal, accidental breakage, damage or improper recycling of e-waste may present risks, including, but not limited to, fire, explosion and/or other hazards, and uncontrolled waste disposal which may be detrimental to/have adverse effects on the environment as it prevents reuse of resources. Some e-waste may contain hazardous chemicals which, if disposed improperly, may make water, soil and other natural resources toxic. Improper disposal may cause harm to plant, animal and human life.

Regulatory information: Japan

When operating in 5GHz (W52/W53), the device is restricted to indoor use only.
Pixel 3 and Pixel 3 XL comply with Japan SAR regulations when used near your ear or at a distance of 5 mm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. 

Pixel 3 maximum SAR values as reported to MIC are

  • 1.08 W/kg when holding it to your ear
  • 1.43 W/kg when properly worn on the body

Pixel 3 XL maximum SAR values as reported to MIC are

  • 1.16 W/kg when holding it to your ear
  • 1.16 W/kg when properly worn on the body

Regulatory information: Taiwan

無線射頻暴露

 

以 Pixel 3 而言, SAR標準值2.0W/kg;送測產品實測值為1.26 W/kg

以 Pixel 3 XL 而言, SAR標準值2.0W/kg;送測產品實測值為1.12 W/kg

台灣法規遵循

使用過度恐傷害視力

(1). 使用30分鐘請休息10分鐘。

(2). 未滿2歲幼兒不看螢幕,2歲以上每天看螢幕不要超過1小時

減少電磁波影響,請妥適使用

 

經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

 

低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。

 

前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

本裝置之使用應避免影響附近雷達系統之操作。

 

內建主記憶體硬體容量:64 GB, 使用者可使用主記憶體容量至少:52 GB

內建主記憶體硬體容量:128 GB, 使用者可使用主記憶體容量至少:113 GB

 

Taiwan RoHS

Equipment Name: 18W USB-C Power Adapter, Type designation: G1000-US, TC-G1000-US

設備名稱:交換式電源供應器,型號(型式):G1000-US, TC-G1000-US

單元\

Unit

限用物質及其化學符號

Restricted Substances and its chemical symbols

鉛Lead

(Pb)

汞Mercury

(Hg)

鎘Cadmium

(Cd)

六價鉻Hexavalent chromium

(Cr+6)

多溴聯苯Polybrominated biphenyls

(PBB)

多溴二苯醚Polybrominated diphenyl ethers (PBDE)

外殼 Enclosure

O

O

O

O

O

O

電子元件 Electronic Component

O

O

O

O

O

連接器 Connector

O

O

O

O

O

電路板 PCB

O

O

O

O

O

O

變壓器 Transformer

O

O

O

O

O

O

塑膠件 Plastic Components

O

O

O

O

O

O

包裝 Packaging

O

O

O

O

O

O

其它 Other

O

O

O

O

O

O

備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。

Note 1: "Exceeding 0.1 wt%" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

備考2.〝O〞係指該項限用物質之百分比含量未超出百分比含量基準值。

Note 2: "O" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

備考3.〝-〞係指該項限用物質為排除項目。

Note 3: The "-" indicates that the restricted substance corresponds to the exemption.

Equipment Name: Pixel 3 and 3 XL Mobile Phone, Type designation: G013A, G013C

設備名稱:移動電話,型號(型式):G013A, G013C

Unit

限用物質及其化學符號

Restricted Substances and its chemical symbols

鉛Lead

(Pb)

汞Mercury

(Hg)

鎘Cadmium

(Cd)

六價鉻Hexavalent chromium

(Cr+6)

多溴聯苯Polybrominated biphenyls

(PBB)

多溴二苯醚Polybrominated diphenyl ethers (PBDE)

外殼 Enclosure

O

O

O

O

O

O

電子元件 Electronic Component

O

O

O

O

O

連接器 Connector

O

O

O

O

O

電路板 PCB

O

O

O

O

O

O

顯示 Display

O

O

O

O

O

O

電池 Battery

O

O

O

O

O

包裝 Packaging

O

O

O

O

O

O

其它 Other

O

O

O

O

O

O

備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。

Note 1: "Exceeding 0.1 wt%" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

備考2.〝O〞係指該項限用物質之百分比含量未超出百分比含量基準值。

Note 2: "O" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

備考3.〝-〞係指該項限用物質為排除項目。

Note 3: The "-" indicates that the restricted substance corresponds to the exemption.

Models:

Pixel 3: G013A, G013B

Pixel 3 XL: G013C, G013D

 

Accessibility Information

Pixel 3

ACCESSIBILITY FEATURE REQUIREMENTS - DESCRIPTION VALUE

Handset/Hardware information

Touch screen  Does the device have a touch screen Yes
If the device has a touchscreen, is it capacitive (sometimes referred to as heat activated) Yes
Key identification Are individual keys easily discernible to the user N/A 
How are the keys discernible - separate keys, use of ridges to define N/A
Key centre point distance What is the distance from the centre point of one number key to another N/A
Keyboard layout The keypad is laid out like a QWERTY typewriter keyboard Yes
Lanyard pin for key ring or lanyard strap Has a small bar allowing a key ring or neck strap (lanyard) to be attached No
Differentiation of function keys The number keys have a different color or shape from the other keys, making them easier to tell apart by touch or by sight N/A
Shape of device A. Clam Shell / Flip Phone
B. Candy Bar / Stick
C. Slide
D. Swivel
E. Touchscreen
F. Other
E
Operating system The operating system and version used by this phone Android P
Anti-slip features Has a non-slip coating or ridges to prevent it slipping out of your hand No

Mobility/Dexterity features

Handset weight Handset weight including battery 148 grams
Easy Battery Placement Is battery clearly marked for proper orientation and placement N/A
Speaker-phone capable Hands free operation during dialing and after call initiated Yes
Guarded/recessed keys Individual keys are recessed or guarded in some way to reduce the chance that you will press the wrong key N/A
Wireless earphones/headsets Wireless earphones and headsets, such as Bluetooth headsets, are supported Yes
Coupling to a device To allow people to use computers as text terminals. Also allows customized devices to work with the phone. Device can be connected to the phone by using:  
  • cable (an electrical wire)
Yes
  • infrared signal (which travels through the air like a radio wave but cannot pass through walls or other solid objects)
No
  • Bluetooth/wireless LAN (radio signals which travel through the air and may also be able to pass through walls or other solid objects)
Yes
  • other connections than those described above (please describe): … … … … … …
Yes
Flat back for table top operation Has a flat back, so it can be used while it is lying on a table Yes
Any key answering The user can answer the call by pressing any key No
Hand movement Some controls require you to pinch or twist them with your fingers, or rotate your wrist Yes
Voice recognition for dialing Allows you to dial a number by speaking the person's name, if it is stored in your contact list (a personal "telephone book" you create in your phone) Yes
Voice recognition for accessing features Allows you to activate features by speaking commands into the phone, reducing the need to use the keypad Yes
Automatic answering Enables the phone to pick up a call automatically after a designated number of rings No

Vision features

Tactile key markers – "F" and "J" The "F" and "J" keys have raised dots or bumps on them so you can distinguish them by touch (only relevant for phones that have a QWERTY typewriter-style keypad) N/A
Standard number key layouts The number keys are laid out in the standard way with 1 2 3 at the top and * 0 # at the bottom Yes – touchscreen keyboard
Key feedback - tactile When you press a key you can feel a physical click, so you know it has been pressed Yes
Key feedback - audible When you press a key it makes a sound, so you know it has been pressed Yes
Audible identification of keys - spoken When you press a number key the number is spoken out, so you know you have pressed the correct one Yes
Audible identification of keys - functions The sounds you hear when you press a key are different for number keys and function keys, so you can easily tell them apart Yes
Adjustable font - style You can change the font (typeface) used for the text on the display, which may make it easier to read Yes
Adjustable font - size You can make the text on the display larger or smaller to make it easier to read Yes
Personalized shortcuts You can assign a particular feature to a single key or a short key sequence Yes
Display characteristics - Adjustable Contrast Control You can adjust the contrast of the display to make text and symbols easier to see against the background

Yes

Display characteristics - Adjustable Brightness Control You can adjust the brightness of the display to make it easier to read Yes
Display characteristics - Main Display Size Size of the main display 62 X 124 mm
Display characteristics - Main Display Resolution The number of dots (called pixels) used to display text and images on the main display. More dots mean more detail. 2160 X 1080
Display characteristics - Color Differentiation The information presented on the display does not rely on color perception for understanding (e.g. you do not have to be able to distinguish red symbols from green symbols) Yes 
Display characteristics - Symbols/Icons Menus can be displayed using symbols or pictures in a grid layout. This can make them easier for some people to understand or remember Yes
Display characteristics - Screen Flicker The main display does not flicker at a rate that could cause problems for people with photo-epilepsy (between 2 Hz and 60 Hz) Yes
Voice output of caller ID from contacts list When you receive a call, it speaks the caller's name if it is stored in your contact No
Voice output of SMS: inbuilt Can read text messages out loud to you Yes
Voiced menus Speaks the menu options, allowing you to access functions even if you cannot read the display

Yes

Alternative format user manual The user manual is available in alternative formats such as accessible online Yes

Hearing Features

Vibrating alert The phone can be set to vibrate when it receives a call or text message or when it gives a warning alert Yes
Visual alerts - Incoming calls When a call or text message comes in, it displays a visual alert, such as the caller's name or photo if it is stored in your contact list Yes
Two-way video communications – using mobile networks Allows you to make video calls in which you can see the other person and they can see you using your mobile network Yes
Two-way video communications – using wireless LAN networks Allows you to make video calls in which you can see the other person and they can see you using your wireless LAN network Yes
Headset – plug type The type of plug a headset will need to have so that it can be connected to the phone USB – 3.5mm adapter supplied in box
Hearing aid compatibility When used with a hearing aid set to the "T" position, the sound is clearer Yes
Alternative hearing aid technologies When used with alternative coupling technologies, the sound is clearer N/A
Messaging Options - MMS Allows you to send and receive multimedia messages, which can include photographs, audio and video clips Yes
SMS personalization and reuse Allows you to create standard text messages that you can quickly send to anyone without having to retype them each time. For example, "I'm in a meeting; I'll call you back" Yes
Messaging options - Email Allows you to send and receive email messages Yes
Internet capability You can use the phone to browse websites and use other internet-based services Yes
ADDITIONAL FEATURES & CHARACTERISTICS Google Pixel 3 is a Touch screen device. However it has the following touch keys : Power and volume control keys Yes
OPTIONAL FEATURES & ACCESSORIES The nature of the open operating system and accessibility features mean that some features are provided as part of the Android operating system and as such are subject to change and upgrade during the life of the product Yes

Pixel 3 XL

ACCESSIBILITY FEATURE REQUIREMENTS - DESCRIPTION VALUE

Handset/Hardware information

Touch screen  Does the device have a touch screen Yes
If the device has a touchscreen, is it capacitive (sometimes referred to as heat activated) Yes
Key identification Are individual keys easily discernible to the user N/A 
How are the keys discernible - separate keys, use of ridges to define N/A
Key centre point distance What is the distance from the centre point of one number key to another N/A
Keyboard layout The keypad is laid out like a QWERTY typewriter keyboard Yes
Lanyard pin for key ring or lanyard strap Has a small bar allowing a key ring or neck strap (lanyard) to be attached No
Differentiation of function keys The number keys have a different color or shape from the other keys, making them easier to tell apart by touch or by sight N/A
Shape of device A. Clam Shell / Flip Phone
B. Candy Bar / Stick
C. Slide
D. Swivel
E. Touchscreen
F. Other
E
Operating system The operating system and version used by this phone Android P
Anti-slip features Has a non-slip coating or ridges to prevent it slipping out of your hand No

Mobility/Dexterity features

Handset weight Handset weight including battery 182 grams
Easy Battery Placement Is battery clearly marked for proper orientation and placement N/A
Speaker-phone capable Hands free operation during dialing and after call initiated Yes
Guarded/recessed keys Individual keys are recessed or guarded in some way to reduce the chance that you will press the wrong key N/A
Wireless earphones/headsets Wireless earphones and headsets, such as Bluetooth headsets, are supported Yes
Coupling to a device To allow people to use computers as text terminals. Also allows customized devices to work with the phone. Device can be connected to the phone by using:  
  • cable (an electrical wire)
Yes
  • infrared signal (which travels through the air like a radio wave but cannot pass through walls or other solid objects)
No
  • Bluetooth/wireless LAN (radio signals which travel through the air and may also be able to pass through walls or other solid objects)
Yes
  • other connections than those described above (please describe): … … … … … …
Yes
Flat back for table top operation Has a flat back, so it can be used while it is lying on a table Yes
Any key answering The user can answer the call by pressing any key No
Hand movement Some controls require you to pinch or twist them with your fingers, or rotate your wrist Yes
Voice recognition for dialing Allows you to dial a number by speaking the person's name, if it is stored in your contact list (a personal "telephone book" you create in your phone) Yes
Voice recognition for accessing features Allows you to activate features by speaking commands into the phone, reducing the need to use the keypad Yes
Automatic answering Enables the phone to pick up a call automatically after a designated number of rings No

Vision features

Tactile key markers – "F" and "J" The "F" and "J" keys have raised dots or bumps on them so you can distinguish them by touch (only relevant for phones that have a QWERTY typewriter-style keypad) N/A
Standard number key layouts The number keys are laid out in the standard way with 1 2 3 at the top and * 0 # at the bottom Yes – touchscreen keyboard
Key feedback - tactile When you press a key you can feel a physical click, so you know it has been pressed Yes
Key feedback - audible When you press a key it makes a sound, so you know it has been pressed Yes
Audible identification of keys - spoken When you press a number key the number is spoken out, so you know you have pressed the correct one Yes
Audible identification of keys - functions The sounds you hear when you press a key are different for number keys and function keys, so you can easily tell them apart Yes
Adjustable font - style You can change the font (typeface) used for the text on the display, which may make it easier to read Yes
Adjustable font - size You can make the text on the display larger or smaller to make it easier to read Yes
Personalized shortcuts You can assign a particular feature to a single key or a short key sequence Yes
Display characteristics - Adjustable Contrast Control You can adjust the contrast of the display to make text and symbols easier to see against the background

Yes

Display characteristics - Adjustable Brightness Control You can adjust the brightness of the display to make it easier to read Yes
Display characteristics - Main Display Size Size of the main display 70 X 144 mm
Display characteristics - Main Display Resolution The number of dots (called pixels) used to display text and images on the main display. More dots mean more detail. 2960 X 1440
Display characteristics - Color Differentiation The information presented on the display does not rely on color perception for understanding (e.g. you do not have to be able to distinguish red symbols from green symbols) Yes 
Display characteristics - Symbols/Icons Menus can be displayed using symbols or pictures in a grid layout. This can make them easier for some people to understand or remember Yes
Display characteristics - Screen Flicker The main display does not flicker at a rate that could cause problems for people with photo-epilepsy (between 2 Hz and 60 Hz) Yes
Voice output of caller ID from contacts list When you receive a call, it speaks the caller's name if it is stored in your contact No
Voice output of SMS: inbuilt Can read text messages out loud to you Yes
Voiced menus Speaks the menu options, allowing you to access functions even if you cannot read the display

Yes

Alternative format user manual The user manual is available in alternative formats such as accessible online Yes

Hearing Features

Vibrating alert The phone can be set to vibrate when it receives a call or text message or when it gives a warning alert Yes
Visual alerts - Incoming calls When a call or text message comes in, it displays a visual alert, such as the caller's name or photo if it is stored in your contact list Yes
Two-way video communications – using mobile networks Allows you to make video calls in which you can see the other person and they can see you using your mobile network Yes
Two-way video communications – using wireless LAN networks Allows you to make video calls in which you can see the other person and they can see you using your wireless LAN network Yes
Headset – plug type The type of plug a headset will need to have so that it can be connected to the phone USB – 3.5mm adapter supplied in box
Hearing aid compatibility When used with a hearing aid set to the "T" position, the sound is clearer Yes
Alternative hearing aid technologies When used with alternative coupling technologies, the sound is clearer N/A
Messaging Options - MMS Allows you to send and receive multimedia messages, which can include photographs, audio and video clips Yes
SMS personalization and reuse Allows you to create standard text messages that you can quickly send to anyone without having to retype them each time. For example, "I'm in a meeting; I'll call you back" Yes
Messaging options - Email Allows you to send and receive email messages Yes
Internet capability You can use the phone to browse websites and use other internet-based services Yes
ADDITIONAL FEATURES & CHARACTERISTICS Google Pixel 3 XL is a Touch screen device. However it has the following touch keys : Power and volume control keys Yes
OPTIONAL FEATURES & ACCESSORIES The nature of the open operating system and accessibility features mean that some features are provided as part of the Android operating system and as such are subject to change and upgrade during the life of the product  
true
Search
Clear search
Close search
Google apps
Main menu
10313949365986235392
true
Search Help Center
true
true
true
false
false