This article contains example configurations you can use to help you set up your network with static IP addresses. For more information on setting up your network, consult with your network expert or other IT professional.
If you use your own router, you must configure your WAN interface to use DHCP.
Setup for 1 static IP
Setup for multiple static IPs
If you have a multi-layer router or firewall and router configuration, you must set up a static route to the first device. Follow these guidelines:
- Make sure the router connected to the Fiber Jack is set to DHCP and that one of its ports is set with one of the static IPs as the gateway address.
- Make sure the remaining routers have static routes pointing to the gateway.