You can add Matter-enabled devices to the Google Home app and control all of your home devices with just one app.
Note: To connect Google Nest devices including Google Nest hubs for Matter and other third-party devices that aren't Matter-enabled to the Home app, follow Set up smart devices in the Google Home app for your specific device instead.
What you need
- A Google Account
- A home Wi-Fi network
- For devices that use Thread, you need a Thread Border Router to complete setup
- One of the following mobile devices:
- Android phone or tablet with Android 8.1 or later and Google Play services version 22.48.14 or later
- iPhone or iPad with iOS 16.5 or later
- Bluetooth Low Energy (BLE) 4.2 or higher
- Latest version of the Google Home app from the Play Store or App Store.
- A Matter-enabled smart home device. Look for the Matter logo on the package.
- A Matter-enabled Google hub to control your device with the Google Home app.
Note: If you don't have a hub, you might be able to add your Matter-enabled device to the Google Home app, but you can't control it.
Set up your Matter-enabled device
Many Matter-enabled devices can be set up directly with the Google Home app. Alternatively, if you set up your device with the manufacturer's app, you can also add your device in the Google Home app and control your device with either app. Note: These instructions don't apply to Google Nest devices.
- Make sure your Matter-enabled device is on and in pairing mode according to the device manufacturer's instructions.
- Look for the pop-up notification on your phone. You may need to open the Google Home app first. Tap Scan QR Code.
- If you don't get a pop-up notification, open the Google Home app , tap Devices Add Matter-enabled device. The app will look for devices to add, if it doesn't find one, it will show a list to select from. Tap Matter-enabled device.
- Scan the Matter QR code of your Matter-enabled device.
- Hold your phone about 5 in (12 cm) away to scan. Learn more tips for scanning QR codes.
- If you're unable to scan the QR code, tap Set up without QR code, then enter the setup key. This should be provided with your product and is often on the device itself.
- If this is your first time setting up a Matter-enabled device, select the Google Home app.
- Tap I agree to connect the device to your Google Account.
- The device will be added to the Home that was last selected. If you'd like, you can move your Matter-enabled device to a different home.
Note: If you don't have a Matter-enabled Google hub, the Google Home app prompts you that a hub is required to control your Matter-enabled device through the Google Home app. You can finish adding your Matter-enabled device to the Google Home app, however you won't be able to control it from the app or with Google Assistant until you add a Matter-enabled Google hub to the Home app. - Once the device connects successfully, select a room where your Matter-enabled device will be located and name your device.
Set up your 3rd-party Matter-enabled device in the manufacturer's app and share it with the Google Home app
- Set up your Matter-enabled device in the manufacturer's app (if there's one available). If you're unable to complete setup in the manufacturer's app, contact the device manufacturer for assistance.
- After you complete the setup, follow the manufacturer instructions to share device access with the Google Home app.
Fix issues during setup
Setup freezes or can't finish
- Restart your Matter-enabled device. Refer to its included instructions or online help to learn how.
- Close the Google Home app.
- Clear the Google Home app's cache. Instructions can vary by OS. On most Android devices, go to Settings Apps select the Google Home app Storage & cache Clear cache. If you can't find the app cache settings, contact your mobile device manufacturer.
- Restart your phone.
- Open the Google Home app and start the setup process again.
If setup continues to freeze or fails to complete, contact your device manufacturer for help. You might need to reset your device.
Manage your Matter-enabled device
Change the nickname of your Matter-enabled device
- Open the Google Home app .
- Tap Devices .
- Touch and hold your device's tile.
- Tap Settings Name.
- Enter a name tap Save.
Assign your Matter-enabled device to a different room
- Open the Google Home app .
- Tap Devices .
- Touch and hold your device's tile.
- Tap Settings Room choose a room tap Next.
Move your Matter-enabled device to a different home
- Open the Google Home app .
- Tap Devices .
- Touch and hold the device's tile.
- Tap Settings Remove device Remove.
Note: Factory reset your device before you add it to another home. - Tap Favorites tap the name of the current home .
- Select the home you want to move the device to and tap Devices Add to add your device.
Remove your Matter-enabled device from the Google Home app
- Open the Google Home app .
- Tap Devices .
- Touch and hold your device's tile.
- Tap Settings Remove device Remove.
Note: If you're no longer using the device, make sure to factory reset it after you remove it.
Learn about how Nest devices work with Matter.