Add drill actions to charts

Drill actions can make charts more interactive, reduce the number of charts in a report, and make it easier for users to find additional context about data.

For example, suppose you want to view session data by both country and city. Rather than include two charts in your report, you can include a single chart with drill actions enabled.

This article provides an overview of the different types of drill actions in Looker Studio and how to implement them in charts.

For more information about how to use drill actions when viewing reports, view the Drill into your data tutorial page. 

On this page:

• Drill actions in Looker Studio
• Requirements for the Drill Down drill action
• Add drill actions to table charts
• Add drill actions to other chart types 
• Drill action limitations and considerations

Drill actions in Looker Studio 

Drill actions let you view levels of detail and more context about the data in a chart. 

There are several types of drill actions:

• The Drill Down drill action lets users drill from a higher level of detail to a lower one (for example, drill down from Country to City) and from a lower level of detail to a higher one (for example, drill up from City to Country).
  
  The Drill Down setting also lets users change or swap the dimensions that are on a report. For example, if Country, State, and City are available drill fields, a user can swap between them on a chart to break down metrics for a different granularity without drilling up or drilling down.
   
• The Drill Through drill action lets users navigate to related content with a preset URL.

Table chart drill actions example

In table charts, drill actions are presented to users in the tooltip that appears when they hover their cursor over a data point in a chart.

For example, if a user hovers their cursor over the state California in table chart that displays FAA flight count by destination, they can click the Drill actions option to see the options that are available for drilling into the data.

The user can then take one of several actions. For example:

• The user can swap the DestStateName dimension for either the DestCityName or Dest dimensions to display the Record Count aggregations for cities or airports instead of states.

• The user can turn on the Filter on "California" switch to limit the chart results to California.

• The user can click the up and down arrows in the Drill Actions menu header to switch the level of granularity on a chart.

• The user can turn on the Filter on "California" switch to display more granular record counts for DestCityName or Dest that are in California.

• The user can click State Google search to drill through to a Google search for more context about a state. 

Column chart drill actions example

In other chart types, such as column charts, users can drill up or drill down by using one of these options: 

1. The Drill up and Drill down arrows that appear in a chart's header when a user hovers their cursor over a chart
2. The Drill up or Drill down options in the three-dot More menu that appears in a chart's header when a user hovers their cursor over a chart

Alternatively, Drill up or Drill down options are available when a user right-clicks on a chart.

For example, if a user clicks the Drill down arrow in a column chart that displays FAA flight count by destination state, the chart will display the chart data for the next dimension that is defined in the drill hierarchy, which is DestCityName. 

Requirements for the Drill Down drill action

To add drill down capability to a chart, you need to define a dimension hierarchy. The hierarchy specifies the levels of detail that a chart can display when users drill down or up. Example hierarchies include the following:

• Date (Year, Month, Day)
• Geography (Country, Region, City)
• Product (Department, Category, SKU)
• Google Analytics events (Event Category, Event Action, Event Label)

Add drill actions to table charts

Adding drill actions is different for table charts than for other types of charts. 

Add a Drill Down action to table charts

To add the Drill Down drill action to table charts, follow these steps:

1. Edit your report.
2. Add a new chart or select an existing chart.  
3. In the Properties panel, click the Setup tab.  
4. In the Dimension section, click the field's data type icon to edit the field.  
5. Click Add Drill Action to open the Add Drill Action menu.
6. In the Drill Down section, drag and drop dimensions from the Data panel or click + Add Field to add dimensions. Each dimension that you add becomes another level of detail that users can drill into or swap on a chart. You can change the order of dimensions by dragging and dropping the dimensions that are listed in the Drill Down section to set the drill hierarchy.
7. Click the Apply button at the bottom of the Add Drill Action menu.

Edit or remove Drill Down fields from table charts

To edit or remove drill down fields from a table chart, follow these steps:  

1. Edit your report.

2. Select the chart that you want to edit.

3. In the Properties panel, click the Setup tab.

4. In the Dimension section, click the field's data type icon to edit the field.

5. Click Add Drill Action to open the Add Drill Action menu.
6. In the Drill Down section, you can edit or remove drill fields.

   1. To edit fields, drag and drop dimensions from the Data panel or click + Add Field to add additional dimensions as desired. You can also change the order of dimensions by dragging and dropping the dimensions that are listed in the Drill Down section.

   2. To remove a field, hover your cursor over a field name, and click the inline X icon that appears.

7. Click the Apply button at the bottom of the Add Drill Action menu.

Add Drill Through links to table charts

To enable the Drill Through drill action for table charts, follow these steps:

1. Edit your report  
2. Add a new chart or select an existing chart.  

3. In the Properties panel, click the Setup tab.

4. In the Dimension section, click the field's data type icon to edit the field.

5. Click Add Drill Action to open the Add Drill Action menu.

6. In the Drill Through section next to Drill Through Link, click + Add URL  to expand the drill through link customization options. 

7. In the Display Name text box, enter the descriptive text that you would like users to see in the Drill actions menu of a chart tooltip. For example, if you link to a related Salesforce page, you can set the display text to "Navigate to Salesforce".

8. In the URL text box, enter the webpage URL. 

9. Click the Save button to save your settings. Alternatively, you can click Cancel to close the customization options for the drill through link.

10. To add additional drill through links, repeat steps 6 through 9.

11. Click the Apply button at the bottom of the Add Drill Action menu.

Edit or remove Drill Through links from table charts

To edit or remove drill through links from a table chart, follow these steps:  

1. Edit your report.

2. Select the chart that you want to edit.

3. In the Properties panel, click the Setup tab.

4. In the Dimension section, click the field's data type icon to edit the field.

5. Click Add Drill Action to open the Add Drill Action menu.

6. In the Drill Through section, you can edit or remove links.

   1. To edit a link, select the link name to expand the drill through link customization options. Make any desired changes to the Display Name or URL fields.

   2. To remove a URL, select the link name to expand the drill through link customization options and click the trash can icon.

7. At the bottom of the Add Drill Action menu, click the Apply button.

Add drill actions to other chart types

To add drill actions to other charts, follow these steps: 

1. Edit your report.

2. Add a new chart or select an existing chart.

3. In the Properties panel, click the Setup tab.

4. In the Dimension section, turn on the Drill down switch to expand the drill options section.

5. Drag and drop dimensions from the Data panel or click + Add Field to add dimensions to the Dimension section. Each dimension that you add becomes another level of detail that you can drill into.
   
   You can change the order of dimensions by dragging and dropping the dimensions that are listed in the Dimension section to set the drill hierarchy.

6. Select a dimension from the Default drill down level drop-down menu to set a default dimension for the chart.

Edit or remove drill actions from other chart types

To turn off drill actions for other charts, follow these steps:

1. Edit your report.

2. Select the chart that you want to edit.

3. Click the Setup tab in the Properties panel.

4. In the Dimension section, you can edit or remove drill fields or turn off drill actions.

   1. To edit drill fields, drag and drop dimensions from the Data panel or click + Add Field to add additional dimensions as desired. You can also change the order of dimensions by dragging and dropping the dimensions that are listed in the Dimension section.
      
      Additionally, you can select a different dimension from the Default drill down level drop-down menu to change the default dimension for the chart.
   2. To remove a field, hover your cursor over a field name, and click the inline X icon that appears.
   3. To turn off drill actions, turn off the Drill down switch.

Drill action limitations and considerations

• Drill actions are not available for community visualizations.

• Drill actions are not available for dimensionless charts such as scorecards and bullet charts.

• Drill fields and links that are imported from Looker data sources are read-only. To make changes to imported drill actions, edit the underlying LookML model in Looker.

• You can see additional levels of detail in pivot tables by turning on expand-collapse. You can then show or hide the data from the dimension hierarchy in the pivot table by clicking + and – in the column header. Learn more about pivot tables.

• Geo charts don’t support all geographic field types within all zoom areas. See the Geo chart reference for more details.